The Dalton ROSDC (Rigid Overload Safety Device Coupling) provides overload protection through the use of an OSD unit combined with a rigid coupling half counterbored to fit the OSD flange. All steel rigid coupling half is bolted to a basic OSD unit to form a rigid coupling with the overload feature.

The ROSDC can be set with a torque wrench for maximum load desired. The unit funcitons as a rigid coupling until an overload occurs, causing the ROSDC to disengage. The device is automatically reengaged when the overload is eliminated.

FORMULA FOR TORQUE-HORSEPOWER (Foot Pounds)

TORQUE (Foot. Pounds) = (HPx5252)/RPM
HORSEPOWER = (Torque x RPM)/5252

Important Note:
The "ROSDC" overload safety device can be made to suit your application. Send us your blueprints or specifications, for recommendations by our engineering department.
Unit of Measure

Maximum Torque

N/A 190 lbs26 mkp

No. of Springs

N/A 1

B - OSD Half

N/A 1 3/8 Inch35 mm

C - Coupling Half

N/A 3/4 Inch19.1 mm

A - Outside Diameter

N/A 6 Inch153 mm

B - Minimum Bore (OSD Half)

N/A 3/4 Inch19.1 mm

C - Minimum Bore (Rigid Coupling Half)

N/A 3/4 Inch19.1 mm

B - Maximum Bore (OSD Half)

N/A 1 3/8 Inch35 mm

C - Maximum Bore (Rigid Coupling Half)

N/A 2 1/4 Inch58 mm

D - Overall Length Thru Bore

N/A 4 3/8 Inch111 mm

E - Length Thru Coupling

N/A 2 Inch51 mm

F - Length Thru OSD

N/A 2 7/8 Inch73 mm

For Bore Sizes Not Shown, Add Charge to List Price per Half

N/A $20.00

Weight

N/A 20 lbs9.10 kg