• Transmits up to 6 HP at 1750 RPM
  • Ratios: 8:1, 16:1 and 32:1
  • Mounts directly on driven shaft, case has drilled and tapped holes for fixed mounting
  • Ground shafts turn on Timken roller bearings, roller thrust bearings on both shafts minimize friction
  • Meehanite or equivalent worm gear, alloy steel cut worm
  • Rotation may be clockwise or counter-clockwise
  • High-alloy grey iron case for rugged service
  • Weight: approximately 40 pounds
  • Bronze gear and hardened, ground worm also available
Unit of Measure

Ratio

N/A 8:1 QUAD/32

Approx. Weight

N/A 40 lbs

N/A WHEN ORDERING, please furnish our Sales Engineering Department with the following information:
(1) Model Number,
(2) Bronze or Cast Iron Gear,
(3) Ratio,
(4) Type of Shaft Arrangement,
(5) Flange or Foot Mount.

Mounting position of unit for proper location of breather, oil level check and drain plugs. Optional grease fittings may be required for proper lubrication.

For special modifications and recommendations to meet your design, contact Sales Engineer Department. All inquiries will be given immediate attention.