Specialy ground sprockets are recommended for use with all Torque Limiters. Both faces of Dalton OSD sprockets are ground to approximately a 32 micro-inch finish. Uniform surfaces and parallel faces insure that Dalton OSD's will maintain proper torque release and re-engagement much longer than units without special sprockets. In addition, fibers last longer and OSD's require less maintenance.

Price Each

Not Hardened
Unit of Measure

MINIMUM SIZE SPROCKETS TO FIT OSD UNIT
OSD-131OSD-225OSD-256OSD-337OSD-362OSD-450 OSD-493OSD-600OSD-750OSD-900
25A20G25A32G35A25G35A31G35A34G35A41G*41A35G*41A52G*40A52G* 60A41G*
35A14G35A22G41A20G41A25G41A26G41A32G40A35G*40A42G*50A42G*80A32G
41A12G41A18G40A20G40A25G40A26G40A32G50A28G*50A34G60A35G*100A26G
40A12G40A18G50A17G50A21G50A22G50A26G60A24G60A30G80A27G120A22G
50A10G50A15G60A15G60A18G60A19G60A23G80A19G80A22G100A22G140A20G
 60A13G 80A14G80A15G80A18G100A16G100A19G120A19G160A18G
     100A15G120A14G120A17G140A17G 
     120A13G 140A15G160A15G 
       160A14G  
Other size sprockets can be furnished
*3 fibers must be used