Dalton Gear Co. - Secondary Adjusting Arm With Angular Base

The secondary arm provides for greater tensioning capabilities in that its position on the Angle base is adjustable.
The secondary arm increases the distance from the mounting surface. This permits the use of idlers with an outside diameter greater than 4-1/2 inches.
This unit is also made of high strength Ductile iron and is painted with Dalton's special paint to prevent rust.
Please call for discounts on list prices.

Unit of Measure

Items	1SA-3 Secondary Adjusting Arm With Angular Base List Price $57.00	2SA-4 Secondary Adjusting Arm With Angular Base List Price $61.00	2SA-5 Secondary Adjusting Arm With Angular Base List Price $61.80	2SA-6 Secondary Adjusting Arm With Angular Base List Price $64.60	D2SA-4 Secondary Adjusting Arm With Angular Base List Price $61.80
A - Pitch	N/A 1-3/8 Inch	N/A 2-1/4 Inch	N/A 2-1/4 Inch	N/A 2-1/4 Inch	N/A 2-1/4 Inch
B - Width	N/A 1-5/8 Inch	N/A 2-1/2 Inch	N/A 2-1/2 Inch	N/A 2-1/2 Inch	N/A 2-1/2 Inch
C - Thread	N/A 3/8 Inch	N/A 1/2 Inch	N/A 5/8 Inch	N/A 3/4 Inch	N/A 1/2 Inch
D - Height	N/A 2-1/4 Inch	N/A 4 Inch	N/A 4 Inch	N/A 4 Inch	N/A 4 Inch
E - Pitch	N/A 1-1/2 Inch	N/A 2-5/8 Inch	N/A 2-5/8 Inch	N/A 2-5/8 Inch	N/A 2-5/8 Inch
F - Slot Width	N/A 1/4 Inch	N/A 3/8 Inch	N/A 3/8 Inch	N/A 3/8 Inch	N/A 3/8 Inch
G - Length	N/A 2 Inch	N/A 3-3/8 Inch	N/A 3-3/8 Inch	N/A 3-3/8 Inch	N/A 3-3/8 Inch