Dalton Gear Company
Dalton Gear Company
Address: 212 Colfax Ave. N
Minneapolis, MN 55405
Toll-Free: 800-328-7485
Phone: 612-374-2150
Fax: 612-374-2467
E-mail: timw@daltongear.com
Print Back
  • The secondary arm provides for greater tensioning capabilities in that its position on the Angle base is adjustable.
  • The secondary arm increases the distance from the mounting surface. This permits the use of idlers with an outside diameter greater than 4-1/2 inches.
  • This unit is also made of high strength Ductile iron and is painted with Dalton's special paint to prevent rust.
  • Please call for discounts on list prices.
Secondary Adjusting Arm With Angular Base
Secondary Adjusting Arm With Angular Base - Dimensional Drawing
Unit of Measure
1 

Item #

A - Pitch

B - Width

C - Thread

D - Height

E - Pitch

F - Slot Width

List Price

1SA-3 N/A 1-3/8 Inch N/A 1-5/8 Inch N/A 3/8 Inch N/A 2-1/4 Inch N/A 1-1/2 Inch N/A 1/4 Inch $57.00
2SA-4 N/A 2-1/4 Inch N/A 2-1/2 Inch N/A 1/2 Inch N/A 4 Inch N/A 2-5/8 Inch N/A 3/8 Inch $61.00
2SA-5 N/A 2-1/4 Inch N/A 2-1/2 Inch N/A 5/8 Inch N/A 4 Inch N/A 2-5/8 Inch N/A 3/8 Inch $61.80
2SA-6 N/A 2-1/4 Inch N/A 2-1/2 Inch N/A 3/4 Inch N/A 4 Inch N/A 2-5/8 Inch N/A 3/8 Inch $64.60
D2SA-4 N/A 2-1/4 Inch N/A 2-1/2 Inch N/A 1/2 Inch N/A 4 Inch N/A 2-5/8 Inch N/A 3/8 Inch $61.80
D2SA-5 N/A 2-1/4 Inch N/A 2-1/2 Inch N/A 5/8 Inch N/A 4 Inch N/A 2-5/8 Inch N/A 3/8 Inch $63.20
D2SA-6 N/A 2-1/4 Inch N/A 2-1/2 Inch N/A 3/4 Inch N/A 4 Inch N/A 2-5/8 Inch N/A 3/8 Inch $66.60
Unit of Measure
1