1.800.328.7485 | Email
Request Information
  • Transmits up to 2.25 HP at 1750 RPM
  • Ratios: 10:1, 20:1, 40:1, 50:1
  • Mounts directly on driven shaft; case has drilled and tapped holes for fixed mounting
  • Heat treated and groundshafts turn on Timken bearings
  • Bronze worm gear; alloy steel cut worm
  • High alloy gray iron case
  • Clockwise or counter-clockwise rotation
  • Weight: Approx. 22 pounds
Unit of Measure

Ratio

 N/A 10:1 QUAD/40

Approx. Weight

 N/A 22 lbs

N/A WHEN ORDERING, please furnish our Sales Engineering Department with the following information:
(1) Model Number,
(2) Bronze or Cast Iron Gear,
(3) Ratio,
(4) Type of Shaft Arrangement,
(5) Flange or Foot Mount.

Mounting position of unit for proper location of breather, oil level check and drain plugs. Optional grease fittings may be required for proper lubrication.

For special modifications and recommendations to meet your design, contact Sales Engineer Department. All inquiries will be given immediate attention.