Secondary Adjusting Arm With Angular Base
Drive Tensioners
- The secondary arm provides for greater tensioning capabilities in that its position on the Angle base is adjustable.
- The secondary arm increases the distance from the mounting surface. This permits the use of idlers with an outside diameter greater than 4-1/2 inches.
- This unit is also made of high strength Ductile iron and is painted with Dalton's special paint to prevent rust.
- Please call for discounts on list prices.
Item # |
A - Pitch |
B - Width |
C - Thread |
D - Height |
E - Pitch |
F - Slot Width |
List Price |
|---|---|---|---|---|---|---|---|
| 1SA-3 | A - Pitch N/A 1-3/8 Inch | B - Width N/A 1-5/8 Inch | C - Thread N/A 3/8 Inch | D - Height N/A 2-1/4 Inch | E - Pitch N/A 1-1/2 Inch | F - Slot Width N/A 1/4 Inch | $57.00 |
| 2SA-4 | A - Pitch N/A 2-1/4 Inch | B - Width N/A 2-1/2 Inch | C - Thread N/A 1/2 Inch | D - Height N/A 4 Inch | E - Pitch N/A 2-5/8 Inch | F - Slot Width N/A 3/8 Inch | $61.00 |
| 2SA-5 | A - Pitch N/A 2-1/4 Inch | B - Width N/A 2-1/2 Inch | C - Thread N/A 5/8 Inch | D - Height N/A 4 Inch | E - Pitch N/A 2-5/8 Inch | F - Slot Width N/A 3/8 Inch | $61.80 |
| 2SA-6 | A - Pitch N/A 2-1/4 Inch | B - Width N/A 2-1/2 Inch | C - Thread N/A 3/4 Inch | D - Height N/A 4 Inch | E - Pitch N/A 2-5/8 Inch | F - Slot Width N/A 3/8 Inch | $64.60 |
| D2SA-4 | A - Pitch N/A 2-1/4 Inch | B - Width N/A 2-1/2 Inch | C - Thread N/A 1/2 Inch | D - Height N/A 4 Inch | E - Pitch N/A 2-5/8 Inch | F - Slot Width N/A 3/8 Inch | $61.80 |
| D2SA-5 | A - Pitch N/A 2-1/4 Inch | B - Width N/A 2-1/2 Inch | C - Thread N/A 5/8 Inch | D - Height N/A 4 Inch | E - Pitch N/A 2-5/8 Inch | F - Slot Width N/A 3/8 Inch | $63.20 |
| D2SA-6 | A - Pitch N/A 2-1/4 Inch | B - Width N/A 2-1/2 Inch | C - Thread N/A 3/4 Inch | D - Height N/A 4 Inch | E - Pitch N/A 2-5/8 Inch | F - Slot Width N/A 3/8 Inch | $66.60 |
